MANUFACTURER OF TOP QUALITY R/C AIRPLANE KITS.
"If you want the BEST, you have to BUILD it."



NEW 40" Super Cub
Kit features:
  • Laser cut balsa and ply parts
  • Vac-formed windshield and side windows
  • Vac-formed cowl
  • Top quality hardware
  • Pre-bent landing gear
  • Rolled black line plan
  • Illustrated instruction book
  • Click here to download the manual as a PDF
 Specifications:
  • 40"  wingspan
  • 26" long
  • Weight: 16 to 17 oz.
  • Wing area: 230 sq. inches
  • Wing loading: 10 oz./square foot
  • Recommended power system: GWS 300A motor and 1200mah 2 cell lithium battery and 8 x 6 prop.
Kit price: $67.95    



The plane flys great with a GWS 300A motor and gearbox (3.75:1)  I used an 8 x 6 APC prop
and a 2 cell 1200mah lithium battery. This is a great power system for this plane!

 The kit  features a molded windshield and side windows. You can also see the wing mounted landing lights and roof window. Notice that the fin is faired into the fuselage....it's not just a flat slab braced with triangle stock.

The motor in the photo is an Ultrafly A/30/24 outrunner with gearbox. On 3 cells, this is too much motor for this plane. It should be OK on 2 cells. The GWS 300A motor on 2 cells is a much less expensive choice.

The prototype airframe weighs 8 oz. as you see it here. It is covered with Black Barron plastic film. There are no servos, pushrods, motor, speed control or battery included in that weight...it is just the airframe alone.

My all up weight ready to fly is 16.3 oz. This gives a wing loading of 10 oz./square foot.This weight is for a 4 channel plane. The plane flys well with rudder and elevator control alone, if you want to build it 3 channel without ailerons.